2017 Forum Agenda: Ghent, Belgium

The following schedule is tentative. Check back often for updates and revisions. Click the links below for details about presentations.

Sessions will be held at the Culture and Convention Center Het Pand unless otherwise noted.

Monday, June 19th 2017

11:00 AM - 4:00 PMPre-Conference Workshop: Experimental aspects of PAT and QbD for powder compaction and continuous tableting
Location: Ghent University, Laboratory of Process Analytical Technology, Dpt. of Pharmaceutical Analysis
For more information about this Workshop, Click Here.
5:00 PM - 6:30 PMTour of Ghent: Sponsored By Huxley Bertram
6:30 PM - 9:00 PMOpening Reception
Sponsored by Huxley Bertram
Huxley-Bertram-Logo_sm

Tuesday, June 20th 2017

CSF Day 1
8:00 AMCoffee, Pastries and Registration
8:45 AMWelcome & Introductions: Kevin J. Bittorf
Keynote Presentations
9:15 AMKeynote: Ajit S. Narang, Ph.D, Genentech:
Essential-and increasingly important-role of compaction simulation in tablet formulation and process design
10:00 AMAxel Zeitler, Ph.D, University of Cambridge:
Using Terahertz measurements to link tablet structure to disintegration and dissolution in immediate release tablets
10:45 AMBreak
11:00 AMShrikant Swaminathan, PhD, Alkermes, Inc.
Characterizing the Strain-rate Sensitivity of Pharmaceutical Powders
11:35 AMMarco Bellini, Freie Universität Berlin
Manufacturing process parameters leading to multilayer tablet failure
12:10 PMDebbie Hooper, University of Greenwich:
From molecule to material to medicine: a case study in the sticking propensity of Ibuprofen
12:30 PMLunch
2:15 PMJiyi Khoo, Ph.D., GlaxoSmithKline R&D Harlow, UK
Importance of tablet core relaxation in the secondary continuous manufacturing process.
2:50 PMR. F. Lammens, Solids Development Consult GmbH
Benefits of performing ultrasonic measurements during powder densification with a compaction simulator
3:25 PMJens Dhondt, Ghent University
Multivariate analysis of powder characteristics and compaction behavior: a step towards building a predictive tabletability platform
4:00 PMBreak
4:15 PMFlash doctoral presentations:
Joesry El Hebieshy – University of Surrey
Hannah Lou Reimer – Heinrich Heine University Düsseldorf
Julien Schockmel – University of Liège
Fien De Leersneyder – Ghent University
5:30 PMPosters and Beer Themed Tasting: Call for Abstracts EXTENDED through June 9th
7:00 PM – 10:00 PMAwards Dinner
Sponsored by

Wednesday, June 21st 2017

CSF Day 2
8:30 AMCoffee and Pastries
Keynote Presentations
9:00 AMKeynote: Douglas B. Hausner, Ph.D, Rutgers University
Experimental and numerical simulation & modelling for tabletting: lessons learned and continuous manufacturing applications
10:00 AMVincent Mazel, Ph.D, Universite de Bordeaux
The link between the mechanical properties of tablets and their capping tendencies
10:45 AMBreak
11:00 AMAshish Kumar, Ph.D, Janssen
Visualisation of compaction behaviour of pharmaceutical powders in solid-dosage manufacturing using finite element analysis
11:35 AMDavid Freiberg & Prof. Antonios Zavaliangos, Drexel University
Towards a experimentally calibrated discrete element simulation of compaction
12:10 PM
Sean Garner, Ph.D, Abbvie
Leveraging advanced modeling for successful tableting using the Drucker-Prager Cap model (DPC)
12:45 PM
lunch
2:15 PMElisabeth Peeters, Ph.D, Pfizer
Influence of extended dwell time during pre- and main compression on the properties of Ibuprofen tablets
3:00 PMWouter Grymonpré, Ghent University
In-line monitoring of compaction properties on a rotary tablet press during tablet manufacturing of hot-melt extruded amorphous solid dispersions
3:35 PMBreak
3:50 PMPedro Valente, Hovione
Integrating spray drying and final dosage process development using compaction simulation data
4:30 PMConclusion: Kevin J. Bittorf, PhD and Prof. Dr. Thomas De Beer
5:15 PMFinal Networking Event: Sponsored by Juniper Pharma Services​

 

Program Scientific Committee:

Prof. Dr. Thomas De Beer Laboratory of Pharmaceutical Process Analytical Technology, Ghent University
Elisabeth Peeters, PhD.    Senior Scientist, Pfizer Inc, Groton USA
Jens Dhondt                       Doctoral student, Ghent University